Home           Products          News           Gallery       Contact Us          Site A-Z            Links

Saveguard Ceramic Fibre Fabrics 
Industrial Textiles 
Fabrics
Texturised Glass Fabrics
Ceramic Fabric
Para Aramid
Meta Aramid
Silica Fabrics
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Top

Product Datasheet

Download datasheet as PDF

Construction:

Saveguard ceramic fibre woven fabrics are manufactured from high performance ceramic fibre yarns re-inforced with either a wire or glass filament. Saveguard ceramic fibre yarns are produced on traditional textile machinery by carding high purity 1260 grade ceramic fibres with a percentage of cellulose fibre to assist in the processing. The yarns are then spun and combined with the relevant re-inforcing media to improve the tensile strength at extended temperatures. The organic content will burn off at temperatures above 200C without affecting the properties of the ceramic fibre however adequate ventilation should be provided during this initial heating. Where tensile strength is important the temperature limitations of the re-inforcing media should be considered.

Properties:

Base Fabric:

Ceramic Fibres are:

resistant to oils, solvents and most chemicals although contact with Phosphoric, hydrofluoric acids, and strong alkalis should be avoided

non combustible.
suitable for use at temperatures up to 1260C dependant on application

have a low thermal conductivity

Finish:

None

Colour:

White 

Technical

Re-inforcement Temp Limitations:

E’ Glass filament:

- Suitable for temperatures up to 550C
Chrome Steel - Suitable for temperatures up to 1000C
Nickel Chrome Alloy Wire 601: - Suitable for temperatures up to 1091C
Chemical Composition
Alumino-Silicate 80% = Al2O3  46%
SiO2    53%

Cellulose 20%

tolerance +/- 5%

Availability:

Thickness 2mm 3mm 5mm
Width 100cm 100cm & 130cm 100cm
Weave plain plain plain
Weight gsm 1100 1500 2800
Roll Length 50m 30m 20m

Typical Applications:

Cover material for Tadpole seals

Furnace Entry and Zone Dividing Curtains

Cable and Pipe Protection

Used extensively in the manufacture of High Temperature Seals 

The information on this Data Sheet is strictly for guidance only and while provided in good faith cannot be guaranteed. The company reserves the right to alter or update this data as and when additional information is received. The Company’s products are used in a wide range of applications over which the Company has no control therefore the Company excludes all conditions or warranties whether expressed or implied as to the fitness of the product for any particular purpose. Customers must establish product suitability via their own tests

Issue No:

1

Page: 1 of 1

Dated:

13th July 1999

File Ref:

prodata\fabrics\loomstate\ceramic\

.pdf