Home           Products          News           Gallery       Contact Us          Site A-Z            Links

  Product Datasheet  
Industrial Textiles 

Texturised Glass Fabrics, Graphite Finish

Download datasheet as PDF

Construction:

Saveguard Texturised Glass Fabrics are manufactured from high performance 9 micron E’ Glass filament texturised yarns. The glass filaments are assembled and voluminised by passing over high pressure air jets to produce a lofted yarn with outstanding insulation properties. These yarns are then closely woven to produce a soft, durable and flexible fabric that can be readily treated or coated to further enhance its properties.

Saveguard Graphited Glass Fabrics are treated with a Graphite/Silicone oil impregnation. a specially formulated, non shedding, lubricating graphite finish that improves resistance to both temperature and abrasion. Graphite treated glass fabrics are particularly suitable for use in hot, dry conditions and aggressive environments where flexing may damage untreated fabrics.

Properties:

Glass Yarns have a minimal amount of surface dressing to assist in processing, this is usually organic i.e. starch or silane and will disappear at temperatures above 200C.  Untreated Glass Fabrics are suitable for continuous use at temperatures of up to 550C however tensile strength continues to reduce noticeably as temperatures increase above 400C.

Base Fabric:

E Glass Fibres:

are resistant to oils, solvents and most chemicals although contact with hydrofluoric acids, strong alkalis and live steam should be avoided.

are non combustible.

have a low thermal conductivity

Finish:

Graphite/silicone oil impregnation. Specially formulated, non shedding, lubricating  finish that improves resistance to both temperature and abrasion. (up to 600C continuous, much higher for short periods)

Colour:

Black/Dark Grey 

Technical:

Fabric Weight 630gsm 1115gsm 2000gsm
Weave Plain Plain Twill
Warp Yarn

ECT9 560 tex

ECT9 1440 tex

ECT9 1415 tex
Weft Yarn

ECT9 560 tex

ECT9 1030 tex

ECT9 1250 tex

Threads/10cm:

64 Warp/50 Weft

56 Warp/32 Weft

100 Warp/50 Weft

Availiability:

Thickness

0.9mm  (+/- 10%)

1.7mm  (+/- 10%)

3mm  (+/- 10%)
Width 100 cm

100 cm

 100 cm
Roll Length

50m

 50m 50m

Chemical:

E’Glass

Texturised Glass Fabrics
Loom state
Graphite Finish
Vermiculite Finish
Weavelock Finish
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
SiO2 54.1% Al2O3 15.3%
CaO 17.3% MgO 4.7%
Na2O 0.6%  B2O3 8.0%
Typical Applications:
 
 
 
 

Welding spark protection blankets/Curtains

Plumbers Pads

Insulation layers in expansion joints

Insulation mattress/jacket cover material

High temperature fabric seals
 
 
 
Frames Page

The information on this Data Sheet is strictly for guidance only and while provided in good faith cannot be guaranteed. The company reserves the right to alter or update this data as and when additional information is received. The Company’s products are used in a wide range of applications over which the Company has no control therefore the Company excludes all conditions or warranties whether expressed or implied as to the fitness of the product for any particular purpose. Customers must establish product suitability via their own tests

Top

Issue No:

1

Page: 1 of 1

Dated:

13th July 1999

File Ref:

prodata\fabrics\finished\glass\graphite

.pdf