Download datasheet as PDF

 

Product Datasheet

Ceramic Fibre Tapes

Webbing and Ladder tapes

Construction:

Saveguard ceramic fibre woven webbing and ladder tapes are manufactured from high performance ceramic fibre yarns re-inforced with either a wire or glass filament. Saveguard ceramic fibre yarns are produced on traditional textile machinery by carding high purity 1260 grade ceramic fibres with a percentage of cellulose fibre to assist in the processing. The yarns are then spun and combined with the relevant re-inforcing media to improve the tensile strength at extended temperatures. The organic content will burn off at temperatures above 200C without affecting the properties of the ceramic fibre however adequate ventilation should be provided during this initial heating. Where tensile strength is important the temperature limitations of the re-inforcing media should be considered.
Properties:
Ceramic Fibres : are resistant to oils, solvents and most chemicals although contact with Phosphoric, hydrofluoric acids, and strong alkalis should be avoided
are non combustible.
have a low thermal conductivity.
are suitable for use at temperatures up to 1260 oC dependant on application

E Glass Fibres are:

are resistant to oils, solvents and most chemicals although contact with hydrofluoric acids, strong alkalis and live steam should be avoided.

are non combustible.

have a low thermal conductivity

Re-Inforcement temperature limitations

Finish:

None

Colour:

White 

E’ Glass filament: -Suitable for temperatures up to 550C
Chrome Steel Wire: -Suitable for temperatures up to 1000C
Nickel Chrome Alloy Wire 601: -Suitable for temperatures up to 1091C
Availability:

Tapes and Webbing

@ 3 mm thick 

 

 

Width

25mm

40mm

50mm

75mm

100mm

Coil Length

25m

25m

25m

25m

25m

Wt/metre - Webbing Tape

38g

60g

75g

113g

150g

Wt/metre -Ladder Tape

36g

57g

71g

107g

142g

Tapes and Webbing

@ 6 mm thick

 

 

Width

25mm

40mm

50mm

75mm

100mm

Coil Length

25m

25m

25m

25m

25m

Wt/metre - Webbing Tape

75g

120g

150g

226g

300g

Wt/metre -Ladder Tape

80g

128g

160g

240g

320g

Chemical:

Alumino-Silicate

80%

Al2O3

46%

SiO2 53%

Cellulose

20% 

Tolerance +/- 5%

Typical Applications:

Ductwork Flange Gasketting

Furnace and boiler door seals

Cable and Pipe Protection

The information on this Data Sheet is strictly for guidance only and while provided in good faith cannot be guaranteed. The company reserves the right to alter or update this data as and when additional information is received. The Company’s products are used in a wide range of applications over which the Company has no control therefore the Company excludes all conditions or warranties whether expressed or implied as to the fitness of the product for any particular purpose.

Customers must establish product suitability via their own tests

 

Issue No:

1

Page: 1 of 1

Dated:

22nd May 2000

File Ref:

prodata\tapes\ceramic

.pdf